How to Maximize Air Conditioner’s Performance and Efficiency

Many people are looking for ways to maximize the performance and efficiency of their AC system, but many don’t know where to start. When the AC is working at an optimum and efficient level, it will consume less power and provide great air conditioning. There are different approaches you can take when it comes to maximizing the performance and efficiency of AC units. One of the most obvious options for improving the efficiency of the system is by replacing an old one with a new one. There are other things you can do. Some of the ways of maximizing the performance and efficiency of air conditioning include;

 

Closing the windows and doors

When your door and windows are open, the AC system will not be performing at an efficient level. This is because the conditioned air can easily escape outside any time the doors or windows are opened. When the air gets out of the house, you will end up back to where it started, and the air getting in will need to be cooled. When you want to get out of the home, consider turning the air conditioning off. You want it to cool your home, and not your entire neighborhood.

 

Plugging leaks in the attic, round windows, under doors, etc.

Air leaks will cause a lot of problems because it leads to loss of efficiency. The cool air inside the house will escape, and warm air will get in. This will force the air conditioner to work harder than it was supposed to do. This will lead to more consumption of energy, and the house might not get to the temperature you were after. It can seem like a small problem, but fixing it will result in significant savings in terms of the energy bill. You can call an expert to help you out with this problem.

 

Thermostat

Many people have a hard time remembering to turn on or off their air conditioning, making it a good idea to get a thermostat that will be doing that for you, and you don’t have to remember anything. You will have more control, and you can easily adjust the settings from the comfort of your seat. You can preset certain conditions, and it will turn on or off depending on the temperature. Using this option can help in saving you a lot of money in power bills. Once you have your sweet spot, you don’t have to worry.

 

Set the thermostat and forget about it

If you are the type of person who keeps fiddling with the thermostat after every couple of minutes, then you need to stop because you are not doing the AC system any favor. When you keep changing the temperature, it can result in the system running longer than needed, and this can mean more on and off cycles which will cause poorer home comfort. Try finding the temperature that works for you and people in your home, then you forget about it. Once you do this, you will see some great changes.

 

Keeping the unit and its environment clean

The outdoor unit needs to be in the best possible condition for it to work efficiently. You should make sure there is no debris on or near the unit. You should have bushes and plants at least two feet away from the unit. The condenser needs to be properly cleaned, if you are not sure how this is done, then do a little research so you don’t end up making any mess. It is a good idea to get a professional to do the cleaning because they have the experience and equipment needed.

 

Turning off lamps and other appliances that produce heat off

Many people assume that the heat produced by appliances is negligible and doesn’t have any effect on the air conditioning of a home, but this is far from the truth. Many appliances produce heat, and the AC will need to cool it down. When you have an appliance that is running but you are not using it, turn it off. Even when the appliance is off but still plugged in, it consumes energy. Leaving them on will force the system to run for longer and work harder than it was supposed to.

 

Air filters

You should always make an effort of checking the air filters so they are always clean. When the air filters are dirty, they cause the air circulation to slow down. If you find that the air filters are dirty, try cleaning them. If you do this and see no improvement, then you should replace them with new and cleaner filters. You should consider changing them after a month or two.

 

Increasing temperature when you are not at home or while sleeping

Doing this will help you save a lot in terms of energy bills and failing to do this means you will be cooling the house for nothing. You can expect to save up to ten percent for every degree you raise during the hotter months of the year.

 

Using ceiling fans

When you use a ceiling fan, you will be able to circulate the cool air inside the home more easily instead of having the air conditioning do all the work. When you set the ceiling fan on low, then you will be able to use less energy.

 

Insulating any exposed ductwork

You should ensure that the ductwork that is running through an unconditioned space has been properly sealed so as to prevent leaks of the conditioned air. Visual leaks can be easily fixed using duct-sealing tape that is UL 181-rated, but you need to let a professional have a look at it the next time he/she comes for the maintenance work.

 

It is a good idea to have a good understanding of the HVAC system and what to do to improve efficiency. Using the above tips from https://bluonenergy.com/ will help you in improving the efficiency of your air conditioning system, which will lead to lower energy bills. Regular maintenance and the above tips will go a long way.

 

Comments are closed.

  • Partner links